AMC1 M.B.102(c) CAA — Qualification and training    

CAA ORS9 Decision No. 1

1. CAA inspectors should have:

1.1. practical experience and expertise in the application of aviation safety standards and safe operating practices;

1.2. comprehensive knowledge of:

(a) relevant parts of implementing rules, certification specifications and guidance material;

(b) the CAA’s procedures;

(c) the rights and obligations of an inspector;

(d) quality systems;

(e) continuing airworthiness management;

(f) operational procedures when affecting the continuing airworthiness management of the aircraft or the maintenance.

1.3. training on auditing techniques.

1.4. five years relevant work experience to be allowed to work as an inspector independently. This may include experience gained during training to obtain the subparagraph 1.5 qualification.

1.5. a relevant engineering degree or an aircraft maintenance technician qualification with additional education. ‘Relevant engineering degree’ means an engineering degree from aeronautical, mechanical, electrical, electronic, avionic or other studies relevant to the maintenance and continuing airworthiness of aircraft/aircraft components.

1.6. knowledge of a relevant sample of the type(s) of aircraft gained through a formalised training course including Fuel Tank Safety (FTS) training as described in Appendix XII to AMC M.A.706(f) and AMC1 M.B.102(c). These courses should be at least at a level equivalent to Part-66 Appendix III Level 1 General Familiarisation.

‘Relevant sample’ means that these courses should cover typical systems embodied in those aircraft being within the scope of approval.

1.7. knowledge of maintenance standards.

2. In addition to technical competency, inspectors should have a high degree of integrity, be impartial in carrying out their tasks, be tactful, and have a good understanding of human nature.

3. A programme for continuation training should be developed which provides for the inspectors, at regular intervals, to visit appropriate manufacturers and attend technical symposia as well as training or refresher courses to gain first-hand knowledge of new developments. As a general policy, it is not desirable for the inspectors to obtain technical qualifications from those entities under their direct regulatory jurisdiction.