AMC M.A.606(h)(2) Personnel requirements    

CAA ORS9 Decision No. 1

1. For the issue of a limited certification authorisation the commander should hold either a valid air transport pilot license (ATPL), or commercial pilots license (CPL). In addition, the limited certification authorisation is subject to the maintenance organisation manual containing procedures to address the following:

(a) Completion of adequate airworthiness regulation training.

(b) Completion of adequate task training for the specific task on the aircraft. The task training should be of sufficient duration to ensure that the individual has a thorough understanding of the task to be completed and should involve training in the use of associated maintenance data.

(c) Completion of the procedural training.

The above procedures should be specified in the maintenance organisation manual and be accepted by the CAA.

2. Typical tasks that may be certified and/or carried out by the commander holding an ATPL or CPL are minor maintenance or simple checks included in the following list:

(a) Replacement of internal lights, filaments and flash tubes.

(b) Closing of cowlings and refitment of quick access inspection panels.

(c) Role changes, e.g., stretcher fit, dual controls, FLIR, doors, photographic equipment etc.

(d) Inspection for and removal of de-icing/anti-icing fluid residues, including removal/closure of panels, cowls or covers that are easily accessible but not requiring the use of special tools.

(e) Any check/replacement involving simple techniques consistent with this AMC and as agreed by the CAA.

3. The authorisation should have a finite life of twelve months subject to satisfactory recurrent training on the applicable aircraft type.