Article 13 - Conformity assessment procedures

1. The manufacturer shall perform a conformity assessment of the product using one of the following procedures with a view to establishing its compliance with the requirements set out in Parts 1 to 6, 16 and 17 of the Annex. The conformity assessment shall take into account all intended and foreseeable operating conditions.

2. The procedures available to conduct the conformity assessment shall be the following:

(a)   internal production control as set out in Part 7 of the Annex, when assessing the compliance of a product with the requirements set out in Parts 1, 5, 6, 16 or 17 of the Annex, subject to the condition that the manufacturer has applied the designated standards for all the requirements for which such standards exist;

(b)  type examination followed by conformity to type based on internal production control as set out in Part 8 of the Annex;

(c)   conformity based on full quality assurance as set out in Part 9 of the Annex, excepted when assessing the compliance of a product which is a toy within the meaning of the Toys (Safety) Regulations 2011.