NCO.OP.110 Aerodrome operating minima — aeroplanes and helicopters
SI 2024 No. 1290
- For IFR flights, the pilot‑in‑command must establish aerodrome operating minima for each planned departure aerodrome, destination aerodrome or alternate aerodrome in order to ensure separation of the aircraft from terrain and obstacles and to mitigate the risk of loss of visual references during the visual flight segment of instrument approach operations.
-
When selecting the aerodrome operating minima, the pilot‑in‑command shall take the following into account:
- the type, performance and handling characteristics of the aircraft;
- his/her competence and experience;
- the dimensions and characteristics of the runways and final approach and take‑off areas (FATOs) that may be selected for use;
- the adequacy and performance of the available visual and non‑visual ground aids;
- the equipment available on the aircraft for the purpose of navigation and/or control of the flight path, during the take‑off, the approach, the flare, the landing, the rollout and the missed approach;
- any conditions or limitations stated in the aircraft flight manual;
- the obstacles in the climb‑out areas and clearance margins;
- the OCA or OCH in the IAP if established;
- the IAP, if established;
- the aerodrome characteristics and the type of air navigation service available;
- any minima promulgated by the State of the aerodrome, where available; and
- the conditions prescribed in any specific approvals for LVOs or operations with operational credits.
-
The minima for a specific type of approach and landing procedure shall only be used if:
- the ground equipment required for the intended procedure is operative;
- the aircraft systems required for the type of approach are operative;
- the required aircraft performance criteria are met; and
- the pilot is qualified appropriately.