CAT.POL.A.105 General

(a)  The mass of the aeroplane:

(1)  at the start of the take-off; or

(2)  in the event of in-flight replanning, at the point from which the revised operational flight plan applies,

 shall not be greater than the mass at which the requirements of the appropriate chapter can be complied with for the flight to be undertaken. Allowance may be made for expected reductions in mass as the flight proceeds and for fuel jettisoning.

(b)  The approved performance data contained in the AFM shall be used to determine compliance with the requirements of the appropriate chapter, supplemented as necessary with other data as prescribed in the relevant chapter. The operator shall specify other data in the operations manual. When applying the factors prescribed in the appropriate chapter, account may be taken of any operational factors already incorporated in the AFM performance data to avoid double application of factors.

(c)  Due account shall be taken of aeroplane configuration, environmental conditions and the operation of systems that have an adverse effect on performance.

(d)  The operator shall take account of charting accuracy when assessing the take-off requirements of the applicable chapters.

(e)  Provision repealed before document was retained.